Skip Navigation

Equipment Bag

Time Frame:
4 class periods that run 60 minutes each.

Group Size:


Students will construct an equipment bag. Students will use fat quarters, basic rotary cutting skills, and beginning sewing techniques.

Main Curriculum Tie:
Apparel Design and Production I
Strand 5 Standard 1

Explain and be able to demonstrate the following construction terms: basting stitch, back stitch, pivot, trimming, reinforce stitch, top stitch, right sides together.

Basting stitch: Set the machine for the longest stitch possible; no backstitching; baste within the seam allowance, close to but not on the seamline.
Back stitch: Stitching a short distance to reinforce stitching in a seam. If available, you may use your machine's "fix" function to lock the stitches at the beginning and end of the seam.
Pivot: Stitch to the corner marking. Leave the needle in the fabric and lift the presser foot. Pivot the fabric. Lower the presser foot and continue stitching.
Trimming: Trimming means to cut off part of the seam allowance to reduce bulk. Trim away 3/8 of an inch of fabric along the full length of the seam. This will leave a 1/4-inch seam allowance. Corners of garment pieces are trimmed by cutting diagonally across the corner. Be careful not to cut through the stitching.
Reinforce stitch: Smaller length stitching that make a seam stronger (12-14) stitches per inch). Reinforcement stitching is used in places like crotches and corners. A second row of stitching to make a seam stronger. This type of reinforcement stitching is used in places like armholes.
Top stitch: Topstitching is a row of evenly spaced straight stitches visible on the right side of a garment, typically aligned parallel to an edge or a seam. Two functions are to anchor layers of fabric together, and to accent an edge as a finishing detail.
Right sides together (RST): Fabrics are placed right sides together when sewing a seam allowance.


  • 2/3 yards of fabric(3 fat quarters)
  • Thread
  • 1½” or larger decorative button
  • Scissors
  • Rotary cutter
  • Ruler
  • Mat

    Intended Learning Outcomes:
    Skills Learned: Rotary Cutting Basics, Straight Stitches (¼”seam allowances), Top Stitching, Hand-sewn Button, Reading and Following Directions

    Instructional Procedures:
    See the attached lesson plan.



    Amber Williams

    Created Date :
    Jun 10 2005 12:40 PM

  •  17924 
    © Utah Education Network in partnership with the Utah State Board of Education and Higher Ed Utah.
    UEN does not endorse and is not responsible for content on external websites linked to from this page.
    (800) 866-5852     |     KUEN CPB Compliance    |     Web Accessibility     |     Captioning